These cute resin crafts are totally adorable, and perfect for gifts, accessories, or just keeping for yourself.
You don’t need special skills, expensive supplies, or any artistic background. If you’re just getting started, be sure to check out Resin Crafts 101: Beginner Guide for Total Beginners.
1. Shaker Charms with Moving Glitter
These charms are so satisfying to make — and even more fun to shake! You’ll need UV resin, glitter, sequins, and a shaker mold with a bezel.
What you need: UV resin, shaker bezel molds, holographic glitter, tiny sequins or star confetti, jump rings, UV lamp
- Clean your shaker mold and lay it flat. Apply a thin layer of UV resin to the bottom of the bezel and cure for 60 seconds to create a solid base so glitter doesn’t sink through.
- Sprinkle in your glitter mix, sequins, and any tiny inclusions you want moving inside. Don’t overfill — the pieces need room to actually shake and move.
- Add a small drop of UV resin around the edges of the bezel only, leaving the center loose to create the trapped air pocket effect. Cure for 60 seconds.
- Place the clear acrylic or glass cover over the top, then seal all edges with a thin line of UV resin. Cure for 2–3 minutes for a strong seal.
- Attach a jump ring through the loop at the top, and your charm is done!
Pro tip: Use holographic glitter mixed with a few chunky pieces for the most satisfying visual effect when shaken.
2. Miniature Fake Food Charms
Think tiny sushi rolls, mini donuts, and itty-bitty cakes. These cute resin charms sell incredibly well. The secret to making fake food look realistic is layering colors and adding tiny hand-painted details.
What you need: Silicone food molds, opaque resin pigments, acrylic paint, fine detail brush, gloss varnish, charm bails
- Choose your food shape and plan your colors ahead of time. Mix resin with an opaque pigment matching your base color — warm beige for a donut, pale peach for a shrimp, and so on.
- Pour the base color into your silicone mold, filling it halfway. Tap gently on the table to release bubbles, then cure under UV light or let it sit if using epoxy.
- For layered foods, add a second tinted layer before the first fully cures so they bond. Press tiny sprinkles or sesame seeds into the partially cured resin for toppings.
- Once fully cured, pop the charm out and use a fine-tip brush with acrylic paint to add details — sauce drips on sushi, grill marks on a burger bun, or seeds on a fruit piece.
- Seal everything with a thin coat of gloss varnish to protect the painted details. Attach a charm bail with strong jewelry adhesive once dry.
3. Kawaii Animal Keychains
Bunnies, frogs, bears — the cuter the better! Kawaii animal molds are widely available online and super easy to use even if you’re brand new to resin.
What you need: Kawaii animal silicone molds, pastel resin pigments, UV resin or epoxy, acrylic paint, fine brush, UV topcoat, keychain rings and jump rings
- Choose your animal shape and mix your resin with a soft pastel pigment. Use mint green for a frog, lavender for a bunny, or pale yellow for a chick. Mix thoroughly to avoid streaks.
- Pour the tinted resin into your mold slowly to avoid trapping air bubbles. If bubbles appear, use a toothpick to pop them or wave a lighter briefly over the surface. Be careful not to overheat.
- Cure the resin according to your product instructions. Once cured, carefully flex the mold to pop the piece out. If edges are rough, sand them lightly with 400-grit sandpaper.
- Use a very fine-tip brush and black acrylic paint to add tiny dot eyes and a small smile to give it that signature kawaii face. Add rosy cheeks with a tiny dab of pink paint or eyeshadow.
- Once the paint dries completely, seal the entire piece with a UV topcoat and cure for a glossy, protective finish. Attach a jump ring and keychain ring to complete it.
4. Mushroom Pendants
Cottagecore lovers, this one’s for you! Mushroom pendants look stunning with classic red and white resin. Use pastel pink and cream for a softer, dreamy vibe.
What you need: Two-part mushroom silicone mold (cap and stem), red and white resin pigments, UV resin or epoxy, sandpaper, pendant bail, jewelry adhesive
- Mix a small batch of white opaque resin for the mushroom stem. Pour it into the stem cavity of your mold, filling it completely. Tap out bubbles and cure fully before moving on.
- Mix red opaque resin and pour it into the cap mold. Before it cures, dot tiny drops of white resin onto the surface with a toothpick for the classic spots — don’t stir, just let them sit naturally.
- Cure the cap fully. Depending on your mold, you can pour both sections separately and glue them together after curing, or use a two-part mold that shapes the full mushroom in one pour.
- Once both pieces are cured and removed from the mold, sand any rough edges using 400 to 800-grit sandpaper. Work from coarser to finer grit for a smooth result.
- Apply a thin UV resin topcoat over the whole piece and cure for a glossy finish. Attach a pendant bail with jewelry adhesive, let it set for an hour, then add your chain or cord.
5. Ocean-Themed Resin Trays
These cute resin crafts are perfect for jewelry holders, candle displays, or desktop decor — and they make gorgeous gifts.
What you need: Silicone tray mold, epoxy resin, teal and white pigments, alcohol ink (optional), dried sand, tiny shells, pearl flakes, 150-grit sandpaper, polishing compound
- Measure and mix your epoxy resin according to package instructions (usually a 1:1 or 2:1 ratio). Stir slowly for at least 3 minutes to minimize bubbles.
- Divide your mixed resin into two or three cups. Tint one with deep teal or ocean blue pigment, one with a lighter aqua, and leave one white or almost clear for the foam effect.
- Pour the teal layer into the mold first, then pour the aqua beside it. Drag a toothpick along the border between the two colors with gentle swirling motions to blend them like waves.
- Dollop small amounts of white resin along the shoreline edge and feather it into thin, foamy streaks. Add dried sand, tiny shells, and pearl flakes before the resin starts setting.
- Let the tray cure undisturbed for 24–48 hours. Once fully cured, demold carefully, sand any rough edges with 150-grit sandpaper, and buff with polishing compound for a clear finish.
6. Butterfly Resin Art
Butterfly resin pieces make gorgeous wall hangings, framed art, or statement decor. Using pressed flowers and gold leaf takes these to a whole new level.
What you need: Large butterfly mold or resin frame, clear epoxy resin, pressed flowers, gold leaf flakes, alcohol ink in 2–3 colors, toothpick
- Pour a thin base layer of epoxy resin into the butterfly mold, just enough to cover the bottom. Let it sit for 20–30 minutes until gel-like before adding inclusions.
- Lay pressed flowers face-down into the partially cured base layer, arranging them as you want them to appear. Press gently so they adhere.
- Drop small amounts of alcohol ink in 2–3 coordinating colors across the surface and swirl with a toothpick. Work quickly before the resin sets further.
- Sprinkle gold leaf flakes across the wet surface for a luxe finish, and add fine glitter along the wing edges for extra sparkle.
- Pour a thicker clear layer over everything, cure fully, then demold and sand if needed. Apply a gloss topcoat and attach a sawtooth hanger to the back if you want to hang it on a wall.
7. Zodiac-Themed Jewelry
Star signs are always trending. Zodiac cute resin crafts make amazing personalized gifts that people actually want to buy or receive.
What you need: Zodiac or constellation silicone molds, deep navy or black resin pigment, fine gold or silver glitter, UV resin or epoxy, high-gloss topcoat, pendant bails or earring posts
- Mix your resin with a deep navy or black opaque pigment. You want a rich, dark base that mimics the night sky — don’t be shy with the pigment.
- Pour the tinted resin into your zodiac molds, filling them about three-quarters of the way. Tap out bubbles with a toothpick.
- Before it cures, sprinkle fine gold or silver glitter across the surface and press it down gently with a toothpick so it looks like it’s floating inside the piece.
- Optionally, dip a fine brush into gold alcohol ink and dot tiny constellation patterns onto the partially cured surface for a more professional finish.
- Cure completely, pop out of the mold, and sand the back flat if needed. Apply a high-gloss UV topcoat over the front and attach bails or earring posts with jewelry adhesive.
8. Fruit Slice Earrings
Lemon, orange, watermelon — these look almost good enough to eat! The layered pour technique is what gives these their realistic, juicy appearance.
What you need: Fruit slice silicone molds, translucent resin pigments (yellow, orange, pink, green), white opaque pigment, UV resin, earring posts, jewelry adhesive, sandpaper
- Mix a small amount of resin with opaque green or yellow pigment and pour a thin strip along the outer edge of the mold. Cure this layer first — it’s what creates the defined rind.
- Mix translucent resin tinted with your fruit color — yellow for lemon, orange for citrus, or pink for watermelon — and pour it over the cured rind layer, filling most of the mold.
- For citrus slices, drag thin lines of slightly lighter resin from the center outward with a toothpick to mimic segment lines. Cure fully.
- Pop the pieces out and sand the backs completely flat with 400-grit sandpaper so the earring post sits flush and hangs properly.
- Apply a UV topcoat to the front and cure for a glossy finish. Attach flat-back earring posts with jewelry adhesive and let cure for at least 2 hours before wearing.
9. Glow-in-the-Dark Charms
Kids and adults alike go absolutely wild for these — and they’re one of the easiest projects on this list!
What you need: Clear UV resin, glow-in-the-dark powder (strontium aluminate works best), any charm molds, UV lamp, jump rings or charm hardware
- Mix glow powder into clear resin at a 10–15% ratio. Stir thoroughly since glow powder tends to clump — take your time until it’s evenly distributed.
- Pour the glow resin into your charm molds of choice — star shapes, crescent moons, and geometric shapes all look amazing. Tap out air bubbles.
- Cure under your UV lamp for 2–3 minutes, making sure the light penetrates the full depth of the piece. Thicker pours may need an extra minute or two.
- Pop the charms out, sand the edges lightly if needed, and apply a clear UV topcoat for a polished finish.
- Before showing off the glow, charge your charms under a bright lamp or sunlight for 1–2 minutes, then turn off the lights and enjoy! Attach hardware and you’re done.
Pro tip: Green glow powder tends to be the brightest and longest-lasting. Blue glow powder looks stunning but fades a bit faster.
10. Resin Dice
Resin dice have a massive audience. Tabletop gamers, collectors, and gift buyers all love them, and custom sets sell incredibly well. This project takes more patience than the others, but the results are absolutely worth it.
What you need: Polyhedral dice mold set (D4, D6, D8, D10, D12, D20), clear epoxy resin, pigments or alcohol ink, glitter or dried flowers, 400–2000 grit sandpaper, polishing compound, acrylic paint for numbers
- Mix your epoxy resin according to package instructions and divide it into two equal portions. Tint with your chosen color or add a swirl of alcohol ink for a marbled effect.
- Fill the bottom mold cavities halfway and add any inclusions — dried flowers, glitter, or foil flakes — while the resin is still liquid. Let cure until firm but slightly tacky, about 12 hours.
- Secure the top half of the mold over the bottom. Pour the second resin batch through the pour hole, seal it with tape or a resin plug, and let everything cure for 24–48 hours.
- Once cured, remove the dice — they’ll look cloudy and rough, and that’s totally normal! Sand each face starting with 400-grit, working up through 800, 1200, and 2000 grit to reveal the clarity underneath.
- Buff each die with polishing compound in circular motions until the faces are clear and glass-like. Fill in the number engravings with acrylic paint, wipe off the excess, let dry, and your dice are ready to roll!
These projects are a fantastic way to flex your creativity and make things people genuinely love. Start with whichever one caught your eye first. Don’t stress about making it perfect — some of the best resin pieces come from happy little accidents.
Looking for more inspo? Explore these easy posts:
Save this Pin!
