Fall is the perfect season to get creative with resin. Let´s get ready to capture the beauty of the season in unique keepsakes and decorations. These 15 fall resin crafts are fun to make and beautiful to display or gift.
If you’re just getting started, be sure to check out Resin Crafts 101: Beginner Guide for Total Beginners.
1. Pressed Leaf Resin Coasters
Materials
- Epoxy resin and hardener
- Silicone coaster mold
- Pressed fall leaves
- Mixing cups and stir sticks
- Disposable gloves
Instructions
Start by cleaning your silicone coaster mold and making sure your pressed leaves are completely dry.
Mix the epoxy resin and hardener according to the manufacturer’s instructions, stirring slowly to minimize bubbles. Pour a thin layer of resin into the mold, then carefully arrange the pressed leaves on top in your desired pattern.
Once the leaves are positioned, slowly pour additional resin until the mold is filled. Use a heat gun or small torch to remove any surface bubbles. Allow the resin to cure fully, following the recommended curing time on the package.
For more detailed instructions and inspiration, check out these Easy DIY Resin Coasters for Beginners.
2. Pumpkin-Shaped Resin Magnets
Materials
- Pumpkin silicone molds
- Orange and green resin pigment
- Epoxy resin
- Magnet backs
- Strong craft glue
Instructions
Prepare your resin by mixing it according to the package directions. Divide the mixture into two separate cups and tint one orange and the other green.
Carefully pour the orange resin into the pumpkin sections of the mold and use the green resin for the stems. If needed, use a toothpick to guide the resin into small areas. Remove any bubbles and allow the pieces to cure completely.
Once hardened, gently remove them from the molds and glue a magnet to the back of each pumpkin. Let the adhesive dry thoroughly before placing the magnets on your refrigerator or magnetic board.
3. Autumn Bookmark Collection
Materials
- Bookmark silicone molds
- Pressed flowers and leaves
- Epoxy resin
- Ribbon
Instructions
Mix the resin thoroughly according to the manufacturer’s instructions. Pour a thin layer into the bookmark mold and carefully arrange pressed flowers and colorful fall leaves on top.
Once you’re happy with the design, slowly pour more resin to cover the decorations completely. Remove any trapped air bubbles and leave the bookmark to cure on a level surface.
After it has fully hardened, remove it from the mold and thread a decorative ribbon through the hole for a finished look that’s perfect for fall reading.
4. Fall Floral Trinket Dish
Materials
- Trinket dish silicone mold
- Epoxy resin and hardener
- Dried fall flowers
- Gold foil flakes
- Mixing cups and stir sticks
- Disposable gloves
Instructions
Begin by preparing your workspace and gathering your dried flowers and gold foil flakes. Mix the epoxy resin and hardener according to the manufacturer’s directions, stirring slowly to reduce bubbles. Pour a thin layer of resin into the trinket dish mold and allow it to settle for a minute or two.
Carefully arrange the dried flowers across the surface, adding a few pieces of gold foil for extra sparkle. Once you’re satisfied with the design, slowly pour additional resin over the decorations until they are fully covered.
Use a heat gun or torch to remove any bubbles that rise to the surface. Allow the resin to cure completely before removing the dish from the mold. The finished piece makes a beautiful place to store rings, earrings, or other small treasures.
5. Acorn and Leaf Keychains
Materials
- Small keychain molds
- Epoxy resin
- Tiny dried leaves or leaf confetti
- Small acorns or acorn caps
- Keychain hardware
- Mixing cups and stir sticks
Instructions
Mix a small batch of resin according to the package instructions and pour a thin layer into each keychain mold. Arrange tiny dried leaves, acorn caps, or seasonal embellishments inside the molds, using tweezers if necessary to position them neatly.
Once the decorations are in place, carefully pour more resin until the molds are filled. Remove any bubbles and allow the resin to cure completely. After demolding, attach keychain rings and hardware through the pre-made holes.
6. Harvest Resin Serving Tray
Materials
- Large tray mold
- Epoxy resin
- Amber, orange, and gold resin pigments
- Gold foil flakes
- Mixing cups and stir sticks
Instructions
To create a tray inspired by the colors of fall, begin by mixing several small batches of resin and tinting them with amber, orange, and gold pigments. Pour the colors into the tray mold one at a time, alternating shades to create a layered effect.
Use a craft stick to gently swirl the colors together without overmixing them. Sprinkle gold foil flakes throughout the design for extra warmth and elegance. After removing any air bubbles, place the mold on a flat surface and allow it to cure fully.
Once hardened, remove the tray from the mold. The finished tray is perfect for displaying candles, serving drinks, or decorating a coffee table during the fall season.
7. Resin Tea Light Candle Holders
Materials
- Tea light holder mold
- Clear epoxy resin
- Pressed autumn leaves
- Mixing supplies
- Battery-operated tea lights
Instructions
Start by selecting small pressed leaves that will fit nicely around the sides of the mold. Mix the resin according to the manufacturer’s directions and pour a shallow layer into the mold. Arrange the leaves around the edges, gently pressing them into place.
Slowly add more resin until the mold is filled, making sure the leaves remain visible from the sides. Remove any surface bubbles and allow the resin to cure completely. Once the candle holder has hardened, remove it from the mold and insert a battery-operated tea light.
When illuminated, the preserved leaves create a warm autumn glow that’s perfect for seasonal decorating.
8. Fall Suncatchers
Materials
- Suncatcher molds
- Clear epoxy resin
- Transparent resin dyes
- Pressed leaves
- Twine or ribbon
Instructions
Create colorful fall-inspired suncatchers by mixing clear resin and adding a few drops of transparent dye in warm seasonal shades such as amber, gold, or orange. Pour the resin into the molds and carefully place pressed leaves throughout the design.
Use a toothpick to reposition the leaves if needed. Remove bubbles and allow the resin to cure according to the package instructions. Once hardened, remove the pieces from the molds and thread twine or ribbon through the hanging holes.
Hang the finished suncatchers in a sunny window where the light can shine through the translucent colors and highlight the delicate leaf details.
9. Dried Wheat Resin Coasters
Materials
- Coaster molds
- Epoxy resin
- Dried wheat stems
- Gold glitter (optional)
- Mixing supplies
Instructions
Trim the dried wheat stems so they fit comfortably inside the coaster molds. Mix the resin thoroughly and pour a thin base layer into each mold. Arrange the wheat stems in attractive patterns, fanning them out or crossing them for visual interest.
If desired, sprinkle a small amount of gold glitter over the design to add sparkle. Carefully pour additional resin until the mold is filled and all decorative elements are covered. Remove any bubbles and leave the coasters to cure on a level surface.
Once fully hardened, remove them from the molds to reveal elegant coasters that beautifully showcase the textures of the harvest season.
10. Pumpkin Spice Resin Earrings
Materials
- Small earring silicone molds
- Epoxy resin and hardener
- Orange, brown, and gold resin pigments
- Earring hooks and jump rings
- Jewelry pliers
- Mixing cups and stir sticks
Instructions
Mix a small batch of epoxy resin according to the manufacturer’s instructions and divide it into separate cups. Tint the resin with orange, brown, and gold pigments to create warm autumn-inspired shades reminiscent of pumpkin spice season.
Pour the colors into the earring molds, either in solid layers or gently swirled together for a marbled effect. Use a toothpick to create subtle patterns if desired. Remove any bubbles and allow the resin to cure completely.
Once hardened, carefully remove the earrings from the molds and attach jump rings and earring hooks using jewelry pliers.
These earrings make wonderful handmade gifts. Explore 15 more DIY Resin Gift Ideas.
11. Thanksgiving Resin Napkin Rings
Materials
- Napkin ring silicone molds
- Epoxy resin and hardener
- Gold, bronze, or amber resin pigment
- Gold foil flakes
- Tiny pressed leaves or dried flowers
- Mixing cups and stir sticks
- Disposable gloves
- Heat gun or small torch
Instructions
Mix the epoxy resin according to the package directions and tint it with gold, bronze, or amber pigment for a warm Thanksgiving-inspired look. Pour the resin into the napkin ring molds and add small pressed leaves, dried flowers, or gold foil flakes for seasonal decoration.
Use a heat gun or torch to remove any bubbles, then allow the resin to cure completely on a flat surface. Once hardened, carefully remove the rings from the molds and lightly sand any rough edges if needed.
12. Thanksgiving Place Card Holders
Materials
- Small silicone molds
- Epoxy resin
- Gold or bronze pigment
- Mini decorative leaves
- Small metal card clips
- Mixing supplies
Instructions
Mix the resin and tint it with a gold or bronze pigment to complement a Thanksgiving table setting. Pour the resin into small molds and add miniature leaves or other seasonal embellishments.
As the resin begins to thicken but is not fully cured, carefully insert a small metal card clip into the center of each piece, making sure it stands upright. Allow the resin to cure completely around the clip.
Once hardened, remove the holders from the molds and insert place cards with guests’ names.
13. Autumn Forest Wall Art
Materials
- Flat panel resin mold
- Epoxy resin
- Pressed leaves
- Dried flowers
- Gold foil flakes
- Hanging hardware
Instructions
Start by pouring a thin layer of resin into a flat panel mold. Arrange pressed leaves, dried flowers, and touches of gold foil to create a scene inspired by a colorful autumn forest. Layer different shapes and colors to add depth and visual interest.
Once you’re happy with the arrangement, slowly pour another layer of resin over the entire design, making sure all decorative elements are fully covered. Remove any bubbles and allow the piece to cure completely. After demolding, attach hanging hardware to the back.
This stunning wall art preserves the beauty of fall foliage and serves as a unique seasonal decoration for your home.
14. Fall Mason Jar Lid Decorations
Materials
- Mason jar lids
- Round silicone molds
- Epoxy resin
- Tiny leaves
- Gold foil flakes
- Strong adhesive
- Mixing supplies
Instructions
Measure the inside of your mason jar lids and choose round molds that will create inserts of the appropriate size. Mix the resin and pour a thin layer into the molds. Arrange tiny leaves, pieces of gold foil, or other fall-themed embellishments within the resin.
Pour additional resin to fully cover the decorations and remove any air bubbles. Allow the inserts to cure completely before removing them from the molds. Apply a strong adhesive to the back of each insert and press it into a mason jar lid.
Once the glue has dried, use the decorated jars as seasonal centerpieces, gift containers, or storage jars for fall treats and craft supplies.
15. Fall Resin Charcuterie Board Accents
Materials
- Wooden charcuterie board
- Epoxy resin and hardener
- Amber, orange, and gold resin pigments
- Gold foil flakes
- Pressed fall leaves (optional)
- Painter’s tape
- Mixing cups and stir sticks
- Disposable gloves
- Heat gun or small torch
- Food-safe resin (if the resin will be near food)
Instructions
Clean and dry the charcuterie board, then use painter’s tape to protect any areas you don’t want covered with resin. Mix the epoxy resin and tint it with amber, orange, and gold pigments.
Pour the resin along one edge or corner of the board, adding gold foil flakes and pressed leaves if desired. Gently swirl the colors together, remove any bubbles with a heat gun, and allow the resin to cure completely.
Once hardened, remove the tape and enjoy your beautiful fall-inspired serving board.
Conclusion
Fall resin crafts are a wonderful way to preserve the colors, textures, and natural beauty of the season. These projects allow you to bring a touch of autumn indoors.
With a few basic resin supplies and some seasonal inspiration, you can create handmade pieces that you’ll enjoy displaying throughout the fall months or gifting to family and friends.
Looking for more inspiration? Check out these Step-By-Step 10 Cute & Trendy Resin Projects.
Save this Pin!
